在目錄/var/opt/gitlab/backups/下會生成一個備份文件如：1552552057_gitlab_backup.tar，其中1552552057即為此次備份都版本號。
[root@localhost ~]# yum install gitlab-ce-9.5.9
已加載插件：fastestmirror, langpacks
gitlab-ce | 2.9 kB 00:00:00
gitlab-ce/primary_db | 2.7 MB 00:00:01
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
正在解決依賴關系
--> 正在檢查事務
---> 軟件包 gitlab-ce.x86_64.0.9.3.6-ce.0.el7 將被 升級
---> 軟件包 gitlab-ce.x86_64.0.9.5.9-ce.0.el7 將被 更新
--> 解決依賴關系完成
依賴關系解決
===============================================================================================================================================================================================================================================================
Package 架構 版本 源 大小
===============================================================================================================================================================================================================================================================
正在更新:
gitlab-ce x86_64 9.5.9-ce.0.el7 gitlab-ce 381 M
事務概要
===============================================================================================================================================================================================================================================================
升級 1 軟件包
總下載量：381 M
Is this ok [y/d/N]: Y
Downloading packages:
No Presto metadata available for gitlab-ce
gitlab-ce-9.5.9-ce.0.el7.x86_6 FAILED 18% [==================- ] 659 B/s | 70 MB 137:35:05 ETA
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: [Errno 12] Timeout on https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
正在嘗試其它鏡像。
gitlab-ce-9.5.9-ce.0.el7.x86_6 FAILED 21% [====================== ] 646 B/s | 83 MB 134:19:56 ETA
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: [Errno 12] Timeout on https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
正在嘗試其它鏡像。
gitlab-ce-9.5.9-ce.0.el7.x86_6 FAILED 81% [===================================================================================- ] 411 B/s | 311 MB 50:00:08 ETA
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: [Errno 12] Timeout on https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
正在嘗試其它鏡像。
gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm | 381 MB 00:01:52
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
gitlab preinstall: Automatically backing up only the GitLab SQL database (excluding everything else!)
Dumping database ...
Dumping PostgreSQL database gitlabhq_production ... [DONE]
done
Dumping repositories ...
[SKIPPED]
Dumping uploads ...
[SKIPPED]
Dumping builds ...
[SKIPPED]
Dumping artifacts ...
[SKIPPED]
Dumping pages ...
[SKIPPED]
Dumping lfs objects ...
[SKIPPED]
Dumping container registry images ...
[DISABLED]
Creating backup archive: 1552553362_2019_03_14_9.3.6_gitlab_backup.tar ... done
Uploading backup archive to remote storage ... skipped
Deleting tmp directories ... done
done
Deleting old backups ... skipping
正在更新 : gitlab-ce-9.5.9-ce.0.el7.x86_64 [############################################################################################################################ ] 1/2 正在更新 : gitlab-ce-9.5.9-ce.0.el7.x86_64 [############################################################################################################################## 正在更新 : gitlab-ce-9.5.9-ce.0.el7.x86_64 1/2
*. *.
*** ***
***** *****
.****** *******
******** ********
,,,,,,,,,***********,,,,,,,,,
,,,,,,,,,,,*********,,,,,,,,,,,
.,,,,,,,,,,,*******,,,,,,,,,,,,
,,,,,,,,,*****,,,,,,,,,.
,,,,,,,****,,,,,,
.,,,***,,,,
,*,.
_______ __ __ __
/ ____(_) /_/ / ____ _/ /_
/ / __/ / __/ / / __ `/ __ \
/ /_/ / / /_/ /___/ /_/ / /_/ /
\____/_/\__/_____/\__,_/_.___/
gitlab: Thank you for installing GitLab!
gitlab: To configure and start GitLab, RUN THE FOLLOWING COMMAND:
sudo gitlab-ctl reconfigure
gitlab: GitLab should be reachable at http://192.168.x.x:8090/gitlab
gitlab: Otherwise configure GitLab for your system by editing /etc/gitlab/gitlab.rb file
gitlab: And running reconfigure again.
gitlab:
gitlab: For a comprehensive list of configuration options please see the Omnibus GitLab readme
gitlab: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/README.md
gitlab:
清理 : gitlab-ce-9.3.6-ce.0.el7.x86_64 2/2
Checking PostgreSQL executables: OK
Shutting down all GitLab services except those needed for migrations
ok: down: gitaly: 1s, normally up
ok: down: gitlab-monitor: 0s, normally up
ok: down: gitlab-workhorse: 1s, normally up
ok: down: logrotate: 0s, normally up
ok: down: nginx: 1s, normally up
ok: down: node-exporter: 0s, normally up
ok: down: postgres-exporter: 0s, normally up
ok: down: postgresql: 0s, normally up
ok: down: prometheus: 0s, normally up
ok: down: redis: 1s, normally up
ok: down: redis-exporter: 0s, normally up
ok: down: sidekiq: 0s, normally up
ok: down: unicorn: 0s, normally up
ok: run: postgresql: (pid 3362) 1s
ok: run: redis: (pid 3370) 0s
run: postgresql: (pid 3362) 1s; run: log: (pid 866) 3488369s
run: redis: (pid 3370) 0s; run: log: (pid 897) 3488369s
Reconfiguring GitLab to apply migrations
* Moving existing certificates found in /opt/gitlab/embedded/ssl/certs
* Symlinking existing certificates found in /etc/gitlab/trusted-certs
gitlab Reconfigured!
Checking for an omnibus managed postgresql: OK
Checking if we already upgraded: OK
The latest version 9.6.3 is already running, nothing to do
Ensuring PostgreSQL is updated: OK
Restarting previously running GitLab services
ok: run: gitaly: (pid 4046) 2s
ok: run: gitlab-monitor: (pid 4086) 1s
ok: run: gitlab-workhorse: (pid 4068) 2s
ok: run: logrotate: (pid 4120) 1s
ok: run: nginx: (pid 4126) 0s
ok: run: node-exporter: (pid 4177) 0s
ok: run: postgres-exporter: (pid 4184) 1s
ok: run: postgresql: (pid 3362) 72s
ok: run: prometheus: (pid 4094) 3s
ok: run: redis: (pid 3370) 71s
ok: run: redis-exporter: (pid 4194) 0s
ok: run: sidekiq: (pid 4203) 1s
ok: run: unicorn: (pid 4216) 0s
Upgrade complete! If your GitLab server is misbehaving try running
sudo gitlab-ctl restart
before anything else. If you need to roll back to the previous version you can
use the database backup made during the upgrade (scroll up for the filename).
驗證中 : gitlab-ce-9.5.9-ce.0.el7.x86_64 1/2
驗證中 : gitlab-ce-9.3.6-ce.0.el7.x86_64 2/2
更新完畢:
gitlab-ce.x86_64 0:9.5.9-ce.0.el7
完畢！
升級Gitlab（注意：由于升級不能跨越大版本號，因此只能升級到當前大版本號到最高版本，方可升級到下一個大版本號）
依次執行下面指令逐步升級，在每一步安裝成功后如果發現界面500，不可訪問，那么執行g(shù)itlab-ctl reconfigure指令刷新配置文件。（一定保證數據可以正常訪問方可執行下一步升級指令）
